User's Manual

 




5
®
ServSwitch CX Uno IP features - front and rear
The ServSwitch CX Uno IP units pack a great deal of functionality into a compact
space. Both models occupy half of a single 1U rack space and provide most of their
connectors at the rear face. The smart front face features the remote user link port
and the operation indicators.
INDOOR
USE
ONL
Y
5V
2.0A
412 311 210 19
816 715
614
513
OPTIONS
COMPUTER CONNECTIONSCOMPUTER CONNECTIONS
LOC REM VNC 100 LNK PWR
BLACK BOX
CX Uno IP
BLACK BOX
724-746-5500
® ®
Options port
This RS232 serial port can separately support the following functions:
• Power switching - can be configured to control multiple power switching devices.
• Remote control switching - commands can be received that will change the
channel, as necessary.
• Synchronization - allows the actions of two or more ServSwitch CX Uno IP switches
to be synchronized so that multiple computers/video screens can be switched and
accessed.
Local user port
Connect a USB keyboard and mouse, plus a video
monitor to these connectors. These allow you to
perform the initial configuration of the ServSwitch
CX Uno IP. Additionally, you can use these to locally
control the connected computer(s).
Computer ports
Each computer connects to one of these ports via
standard category 5, 5e or 6 cabling. At the other
end of the cabling a SAM (Server Access Module)
is used to provide the necessary keyboard, video,
and mouse connections.
Power input
The power supply
connects here.
IP network port
The port by which global users are linked to
the ServSwitch CX Uno IP unit. This intelligent
Ethernet port can automatically sense whether
it is attached to a 10Mb or 100Mb network.
Indicators
These six indicators clearly show the key aspects of operation:
• LOC Keyboard or mouse data are being received from the local console.
• REM Keyboard or mouse data are being received from the remote console.
• VNC Indicates that a global user is connected and active.
• 100 Indicates the Ethernet network speed (10/100Mbs).
• LNK Indicates that a network link is present.
• PWR Indicates that power is present.