User's Manual

724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 17
EME149A-20
Chapter 2: Overview
2.4.2 ServSensor with 20 or 60 Extra Dry Contact Web Interface Setup
Figure 2-10. Sensors page.
First login to the ServSensor Web interface, then navigate to the Sensors Page, then click on the Dry Contact Ports link in the left
hand column. You can now click on the dry contact port to set up that port as shown in the screen shot above.
Figure 2-11. Normal settings screen.
In the Normal tab settings we can see that the sensor is currently offline, so to enable the dry contact port we would click on the
Offline button.