Manualshelf

User's Manual

ManualsBrandsBlack Box ManualsNetwork HardwareBlack Box Black Box Network Hardware servsensor v4e lite with 20 or 60 vac or vdc dry contacts
21222324252627282930
724-746-5500 | blackbox.com
Page 24
EME149A-20
724-746-5500 | blackbox.com
Chapter 3: Installation
1. Click “System Administrator” and then “System Maintenance.”
2. Click “Upgrade.”
Figure 3-8. System Administrator, System Maintenance screen.
3. The popup screen shown in Figure 3-9 appears.
Figure 3-9. Reboot prompt.
4. Click “OK.” The unit will reboot in Safe Mode. Then you will be redirected to the Safe Mode Web-based interface. This can
take some time, so please be patient. The page will display the message shown in Figure 3-10 when rebooting.
Figure 3-10. Firmware Upgrade Rebooting screen.