Manualshelf

User's Manual

ManualsBrandsBlack Box ManualsNetwork HardwareBlack Box Black Box Network Hardware servsensor v4e lite with 20 or 60 vac or vdc dry contacts
51525354555657585960
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 53
EME149A-20
Chapter 4: Notifications
Figure 4-2. Notification Wizard page.
Next, you’ll see how to set up a few different ways of notification step by step.
4.2 SNMP Trap
If you set up a notification via an SNMP trap, when your sensor reaches a certain threshold, it will send a notification to your
SNMP server.
This tutorial provides you with the information you need to set up an SNMP trap.
To get to the tutorial’s starting point:
• Log in as administrator.
• Click the “Notifications” tab.
• Choose “Notifications Wizard.”
• Choose “SNMP Trap.”
1. After selecting to add an SNMP trap, you will need to fill in the following information shown in Figure 4-3.
Figure 4-3. Add an SNMP trap.