User's Manual

724-746-5500 | blackbox.com

Page 59

EME149A-20

Chapter 4: Notifications

Figure 4-14. Input SMTP server address.

5. Once this is entered, click “Next.”

6. Now, as with the SNMP trap, you can select how many times to attempt to resend the e-mail, and the time elapsed between

each attempt.

7. Click “Next” after you fill in your parameters. (See Figure 4-15.)

Figure 4-15. Select frequency to resend e-mail attempts.

8. Now link the e-mail you just created to the temperature sensor on Port 1. Select the board the sensor is attached to, then

select the sensor and click “Next.” (See Figure 4-16.)

Figure 4-16. Select sensor.