User's Manual

724-746-5500 | blackbox.com

Page 83

EME149A-20

Chapter 8: Frequently Asked Questions (FAQs)

Question: How do I set up my routing table?

Answer: To set up the routing table, open a DOS window (start, run type command press enter) and at the command prompt,

then enter: >route add 192.168.0.100.10.1.1.20

Where 10.1.1.20 is the IP address of the Ethernet interface on the PC that the unit is plugged into with the crossover cable.

Now ping* 192.168.0.100 to see if the connection was successful.

Question: How can I change my administrator password?

Answer: If you want to make your unit more secure and change the administrator password from the default (public) to your

own choice, follow these steps:

1. Log into your unit using the default password.

2. Click the “Settings” tab.

Figure 8-6. Select change password option.

3. Change the password.

Figure 8-7. Change user and/or admin passwords.