User's Manual

24
ETHERNET TO TWINAX/COAX PRINT SERVER
c. Enter the remote TCP/IP subnet mask in the “Remote Subnet Mask”
field. You may view the last eight subnet mask entries made in this field
by clicking on the down arrow. If the desired subnet mask is listed, click
on that entry.
d. Click OK.
• To scan for all print servers located on the local subnet:
a. Check the radio button to the left of the “Scan the local subnet” option.
b. Click OK.
3. Once you have made a selection of scanning the local subnet, a remote
TCP/IP subnet, or for a specific print server, pressing the Scan button on the
button bar will refresh the listing of print server(s). From here, you can
double click on the desired print server or clicking on the Configure button
to view or change the highlighted print server’s configuration.
4.1.4 W HERE TO N OW . . .
You are now ready to configure the host(s). From here go to the appropriate
section for each host to be configured.
Configuring the Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.1
Configuring the IBM Mainframe for TN3270e . . . . . . . . . . . . . . . . Section 4.2
Configuring for IPDS Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.3
Configuring OS/400 for TN5250e . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.4
Configuring OS/400 for AnyNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.5
Configuring Windows NT V3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.6
Configuring Windows NT V4.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.7
TCP/IP DirectPort Printing for Windows 95/98 . . . . . . . . . . . . . . . Section 4.8
4.2 Configuring the IBM Mainframe for TN3270e
The Ethernet to Twinax/Coax Print Server communicates to the IBM mainframe
with TCP/IP using the TN3270e protocol. TN3270e is an extension of the Telnet
display protocol. IBM has limited the types of printers that can be configured in