LMC009A-R5 Compact Media Converter TP/BNC 50-ohm Converts twisted-pair to 50-ohm coax cable. This converter uses already-installed 50-ohm analog cable, so you won’t have to re-cable.
FCC and IC RFI Statements FCC and Industry Canada RF Interference Statements Class A Digital Device. This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
FCC and IC RFI Statements Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. Class 1 Laser product, Luokan 1 Laserlaite, Laser Klasse 1, Appareil A’Laser de Classe European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste. This symbol indicates that the equipment should be disposed of separately from regular household waste.
Table of Contents Table of Contents 1. 2. 3. 4. 4.1 4.2 4.3 5. 6. 7. Specifications............................................................................................ 5 Overview: About the Compact Media Converter TP/BNC 50-ohm........... 6 Install the Compact Media Converter TP/BNC 50-ohm............................ 7 Operation .................................................................................................. 8 Compact Media Converter TP/BNC 50-ohm Front Panel .....................
Chapter 1: Specifications 1. Specifications Environmental Operating Temperature: Storage Temperature: Humidity: Input Specifications: LMC009A-R5 +32°F to +122°F (0°C to +50°C) -4°F to +158°F (-20°C to +70°C) 5 to 90% (non-condensing) 100-240 ±10% V AC, 50/60Hz, 1/0.5A 724-746-5500 | blackbox.
Chapter 2: Overview: Compact Media Converter TP/BNC 50 Ohm 2. Overview: About the Compact Media Converter TP/BNC 50-ohm With the Compact Media Converter TP/BNC, 50-ohm coax cable installations become more accessible. The Compact Media Converter TP/BNC is a 10 Mbps Ethernet Twisted Pair to 50-ohm Coax cable (e.g. RG-59) Media Converter, that allows the continued use of the already-installed 50-ohm analog cable, eliminating the need to re-cable. As a low-cost, IEEE 802.
Chapter 3 Installation 3. Install the Compact Media Converter TP/BNC 50-ohm The Compact Media Converter TP/BNC converters come ready to install. Deploy Compact Media Converter TP/BNC units in pairs, or connect a Compact Media Converter TP/BNC converter to another Black Box converter. To install a Compact Media Converter TP/BNC converter, first make sure that the unit is placed on a flat surface.
Chapter 4: Operation 4. Operation 4.1 Compact Media Converter TP/BNC 50-ohm Front Panel The LEDs Each Compact Media Converter TP/BNC features diagnostic LEDs. The following illustration shows the location of the LEDs, and other features, on the Compact Media Converter TP/BNC.
Chapter 5: Contacting Black Box 5. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day, 7 days a week. Call: 724-746-5500 or Fax: 724-746-0746 Mail order: Black Box Corporation 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com E-mail: info@blackbox.com LMC009A-R5 724-746-5500 | blackbox.
Chapter 6: Fiber Optic Cleaning Guidelines 6. Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Good system performance requires clean optics and connector ferrules. 1.
Chapter 7: Electrostatic Discharge Precautions 7. Electrostatic Discharge Precautions Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units, containing electronic components. Always observe the following precautions when installing or handling these kinds of products. 1. Do not remove unit from its protective packaging until ready to install. 2. Wear an ESD wrist grounding strap before handling any module or component.
LMC009A-R5, Rev.
