LIC022A-R2 LIC023A-R2 LIC024A-R2 LIC025A-R2 LIC026A-R2 LIC027A-R2 LIC052A-R2 LIC053A-R2 LIC054A-R2 LIC055A-R2 LIC056A-R2 LIC057A-R2 MultiPower Industrial Media Converters Choose from four different ways to power these hardened media converters.
TRADEMARKS USED IN THIS MANUAL Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. Page 2 724-746-5500 | blackbox.
FCC and IC RFI Statements FCC and Industry Canada RF Interference Statements Class A (using DC terminal power or Power over Ethernet (PoE). This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
Certifications Certifications Class 1 Laser product, Luokan 1 Laserlaite, Laser Klasse 1, Appareil A’Laser de Classe European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste. This symbol indicates that the equipment should be disposed of separately from regular household waste.
Table of Contents Table of Contents Part Numbers ...................................................................................................... 6 1. Specifications ......................................................................................... 7 2. Overview: About the MultiPower Industrial Media Converters.............. 8 3. Install the MultiPower Industrial Media Converters................................ 9 3.1 DIN Rail Mounting ............................................................
Part Numbers Part Numbers Part Number LIC022A-R2 LIC023A-R2 LIC024A-R2 LIC025A-R2 LIC026A-R2 LIC027A-R2 LIC052A-R2 LIC053A-R2 LIC054A-R2 LIC055A-R2 LIC056A-R2 LIC057A-R2 Page 6 Description TP-TX/FX-MM1300-ST (5 km) TP-TX/FX-MM1300-SC (5 km) TP-TX/FX-SM1310/PLUS-ST (30 km) TP-TX/FX-SM1310/PLUS-SC (30 km) TP-TX/FX-SM1310/LONG-ST (80 km) TP-TX/FX-SM1310/LONG-SC (80 km) TP-TX/SSFX-SM1310-SC (1310xmt/1550rcv) (20km) TP-TX/SSFX-SM1550-SC (1550xmt/1310rcv) (20km) TP-TX/SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) (40km
Chapter 1: Specifications 1. Specifications Ethernet Connections DC terminal DC (jack) PoE AC Wall Adapter Power Consumption (Typical) Operating Temperature DC configurations With AC wall adapter Storage Temperature Humidity Dimensions LIC022A-R2 • 10/100 BaseT • Auto Negotiation • Auto-Cross • Flow Control • 1916 MTU • Full Line-Rate Forwarding 7 to 50 VDC, 1 to0.
Chapter 2: Overview 2. Overview: About the MultiPower Industrial Media Converters The MultiPower Industrial Media Converters provide a single conversion between 10/100 Base-T twisted pair and 100 Base-SX/FX fiber. This device Auto Negotiates speed and duplex on the copper port and the fiber is 100Mbps, FDX. The unit supports jumbo frames up to 1916 MTU.
Chapter 3: Install the MultiPower Industrial Media Converters 3. Install the MultiPower Industrial Media Converters The MultiPower Industrial Media Converters install virtually anywhere as standalone devices in locations with extremely limited space. Installation options include: • Velcro strips • DIN rail mounting with DIN Rail clips • PowerTray/18 for high density applications 3.
Chapter 3: Install the MultiPower Industrial Media Converters 3.3 Powering the MultiPower Industrial Media Converters The MultiPower Industrial Media Converters include multiple powering options: • A country-specific, high-reliability AC power adapter (included) • The IEEE 802.3af Power over Ethernet standard; draws power from power sourcing equipment • The 4-terminal DC power block • IE PowerTray 18-Slot AC for Rack Mounting • USB cable • IE-5V DIN rail mount Power Supply 3.
Chapter 4: Operation 4. Operation The MultiPower Industrial Media Converters include two LEDs, located on the RJ-45 connector. LED functions are as follows: LED functions are as follows (above illustration is representative): FX LNK/ACT TX LNK/ACT LIC022A-R2 Glows green when a link is established on the fiber port; blinks green when activity is detected on the fiber port. Glows amber when a link is established on the copper port; blinks amber when activity is detected on the copper port.
Chapter 5: Contacting Black Box 5. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day, 7 days a week. Call: 724-746-5500 or Fax: 724-746-0746 Mail order: Black Box Corporation 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com E-mail: info@blackbox.com Page 12 724-746-5500 | blackbox.
Chapter 6: Fiber Optic Cleaning Guidelines 6. Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Good system performance requires clean optics and connector ferrules. 1.
Chapter 7: Electrostatic Discharge Precautions 7. Electrostatic Discharge Precautions Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units, containing electronic components. Always observe the following precautions when installing or handling these kinds of products. 1. Do not remove unit from its protective packaging until ready to install. 2. Wear an ESD wrist grounding strap before handling any module or component.
Notes LIC022A-R2 724-746-5500 | blackbox.
LIC022A-R2 Rev. 1 55-80722BB-00 Rev.
