Electronic Accessory User Manual

724-746-5500 | blackbox.com
Page 22
724-746-5500 | blackbox.com
ServSensor EXP 8
12. Once we have created the parameters for the SNMP trap, we need to make it active. To do this, go back to the “Notification”
tab. It should look like the screen shown in Figure 4-7.
Figure 4-7. Notification tab.
13. Select the sensor and SNMP trap parameters as before. Figure 4-8 appears. Select the expansion board, then select the
sensor. Click “Next.”
Figure 4-8. Select the expansion board, then select the sensor.