Specifications

Copyright © 2012 Black Box Network Services. All Rights Reserved.
724-746-5500 | blackbox.com 153
Setup
9.4.6.3 LDAP tests
The LDAP tests will test the current LDAP settings and give you feedback on any issues.
Recommendation: Always test any change to the LDAP settings before rebooting the iCOMPEL.
Running the tests
To run a test enter the Test Username to use in the tests and click the Test LDAP settings button.
Test results
The test results are displayed in two parts: a table showing the status of each step and a detailed log.
When everything is setup correctly and a valid iCOMPEL username is used, the status will show as Passed. The
permissions that the user has are also shown.
Check that the permissions are what is expected and change the LDAP setting if necessary to fix the problem.
The following table shows which of the LDAP settings need checking when a problem occurs. Also check the Log
Messages for details on the problems.
Test
Checks
Bind to LDAP server
Configuration and Bind sections
Search for FTP user
FTP User section
FTP Read/Write Access
FTP User section User Filter
Search for HTTP user
HTTP User section
Find HTTP user
HTTP User section
Search for group membership
HTTP Permissions section
Ad hoc Permissions
Ad hoc Users section
9.4.7 Reporting & Remote Setup
This page allows you to configure how the iCOMPEL reports status information to a iCOMPEL Deployment Manager.
Reports can be sent using the HTTP protocol or over a VPN connection to the iCOMPEL Deployment Manager.
When a VPN is used, the iCOMPEL Deployment Manager is able to control the iCOMPEL Web Interface and optionally
can SSH to the iCOMPEL.
If the iCOMPEL is reporting using HTTPS or over a VPN connection it can be configured to report its setup files to the
iCOMPEL Deployment Manager and to accept updated setup files from it.
Note: Some features may depend on installed feature keys.
Click the Save Changes button after making changes.
The Status tab shows the reporting status.