Specifications

724-746-5500 | blackbox.com 158

iCOMPEL Digital Signage - User Guide (V9.0.3)

9.6.2 Automatic

Settings tab

This tab allows you to configure the Software Update manager.

Update Mode

Select the update mode you wish to use:

Automatically download and install updates - The iCOMPEL automates all the steps necessary to keep itself up to

date.

Check for new updates but do not download or install them - The iCOMPEL checks for new updates and shows the

results on the Status tab.

Turn off automatic update - Updates to the iCOMPEL software must be completed manually by the user.

Reboot Allowed

Set the days and time of day that the iCOMPEL may be rebooted to install an update.

Download Allowed

Set the days and times of day that the iCOMPEL may be checked for updates and download them.

Update Server URL

Enter the URL of the update server. This is the address of the web site that contains update information.

Check Interval

Set a check interval in hours and minutes.

Checking is the process of logging on to Update Server, determining whether a new update is available or not and initiating

the copying of the new update if required by the Update Mode. The Check Interval is the frequency of, or time between,

successive checks.

Authentication

If required, enter the Username and Password to gain access to the Update Server.

Proxy

If a proxy server is required to contact the Update Server URL, then enable this setting and ensure that a Proxy has been

configured for Software Update in the HTTP Proxy page.

9.6.3 Status

Update Status tab

The first part of this tab shows the results from the last installation of an update. The second part shows the status of the

automatic software update manager.