Specifications

Page 10
724-746-5500 | blackbox.com
KV9622A
Chapter 2: Overview
Table2-1.Front-panelcomponents(KV9622AandKV9624A).
Number Component Description
1 CPU Status LEDs
LEDs light when the connected computer is
powered on.
2 Port selection buttons
Press buttons 1–4 individually to select a com-
puter.
2 Scan time buttons
Press buttons 1 and 2 together to change the
Scan time interval. The unit beeps 1,2, 3, or 4
times for scan times of 3, 8, 15, or 30 seconds,
respectively.
2 AutoScan buttons
Press buttons 3 and 4 together to start AutoScan.
3 CPU Select LED
LEDs light when the connected computer is
selected.
4 Scan time LEDs LED lights when you select Scan time interval.
5 AutoScan LED LED lights during AutoScan.
6 Power LED Lights when power is on.
2.3.2 Rear Panel
Figure2-3showsthe2-PortServSwitchunit’s(KV9622A)rearview.Figure2-4
showsthe4-PortServSwitchunit’s(KV9624A)rearview.Table2-2describesthe
components numbered in the illustrations.
7 13 8 11
12
12
9 10
Figure2-3.The2-PortServSwitch(KV9622A)back-panelview.