Server User Manual

 In Computer, enter the appropriate IP Address and Port Number:
 Where there is a direct local or enterprise VPN connection, enter the IP Address of the
console server, and the Port Number of the SDT Secure Tunnel for the console server serial
port that you attach to the Windows computer you want to control. For example, if the
Windows computer is connected to serial Port 3 on a console server located at
192.168.0.50, then you would enter 192.168.0.50:7303.
 Where there is an SSH tunnel (over a dial up PPP connection or over a public internet
connection or private network connection), simply enter the localhost as the IP address,
127.0.0.1. For Port Number, enter the source port you created when setting SSH tunneling
/port forwarding (in Section 6.1.6), for example, :1234.
 Click Option. In the Display section, specify an appropriate color depth (for example, for a
modem connection we recommend that you not use over 256 colors). In Local Resources,
specify the peripherals on the remote Windows computer that are to be controlled (printer,
serial port, etc.).
_____________________________________________________________________
724-746-5500 | blackbox.com Page 121