Server User Manual

 Enter the Default Lease time and Maximum Lease time in seconds. The lease time is the time
that a dynamically assigned IP address is valid before the client must request it again.
 Click Apply.
The DHCP server will sequentially issue IP addresses from a specified address pool(s):
 Click Add in the Dynamic Address Allocation Pools field.
 Enter the DHCP Pool Start Address and End Address and click Apply.
The DHCP server also supports pre-assigning IP addresses to be allocated only to specific MAC addresses
and reserving IP addresses to be used by connected hosts with fixed IP addresses. To reserve an IP
addresses for a particular host:
 Click Add in the Reserved Addresses field.
 Enter the Hostname, the Hardware Address (MAC), and the Statically Reserved IP address for
the DHCP client and click Apply.
When DHCP has initially allocated hosts addresses, copy these addresses into the pre-assigned list so the
same IP address will be reallocated if you reboot the system.
3.6.3 Select Failover or broadband OOB
The LES1508A, LES1408A, LES1416A, LES1432A, LES1448A, LES1308A, LES1316A, LES1332A, LES1348A,
LES1208A-R2, LES1216A-R2, LES1232A and LES1248A-R2 console servers provide a broadband failover
option. If you have a problem using the main LAN connection for accessing the console server, an
alternate access path is used.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 41