Server User Manual

6.2.1 SDT Connector installation 104
6.2.2 Configuring a new console server gateway in the SDT Connector client 105
6.2.3 Auto-configure SDT Connector client with the user’s access privileges 106
6.2.4 Make an SDT connection through the gateway to a host 107
6.2.5 Manually adding hosts to the SDT Connector gateway 108
6.2.6 Manually adding new services to the new hosts 109
6.2.7 Adding a client program to be started for the new service 111
6.2.8 Dial in configuration 113
6.3 SDT Connector to Management Console 113
6.4 SDT Connector - telnet or SSH connect to serially attached devices 114
6.5 Using SDT Connector for out-of-band connection to the gateway 116
6.6 Importing (and exporting) preferences 117
6.7 SDT Connector Public Key Authentication 118
6.8 Setting up SDT for Remote Desktop access 119
6.8.1 Enable Remote Desktop on the target Windows computer to be accessed 119
6.8.2 Configure the Remote Desktop Connection client 120
6.9 SDT SSH Tunnel for VNC 124
6.9.1 Install and configure the VNC Server on the computer to be accessed 124
6.9.2 Install, configure and connect the VNC Viewer 125
6.10 Using SDT to IP connect to hosts that are serially attached to the gateway 127
6.10.1 Establish a PPP connection between the host COM port and console server 127
6.10.2 Set up SDT Serial Ports on console server 131
6.10.3 Set up SDT Connector to SSH port forward over the console server Serial Port 132
6.11 SSH Tunneling using other SSH clients (e.g. PuTTY) 132
ALERTS AND LOGGING 135
7.2.1 UPS / Power Supply 137
7.2.2 UPS Status 137
7.2.3 Serial Login/Logout 138
7.2.4 ICMP Ping 138
7.2.5 Cellular Data 138
7.2.6 Custom Check 138
7.2.7 SMS Command 139
7.3 Trigger Actions 140
7.3.1 Send Email 140
7.3.2 Send SMS 141
7.3.3 Perform RPC Action 141
7.3.4 Run Custom Script 141
7.3.5 Send SNMP Trap 141
7.3.6 Send Nagios Event 141
7.4 Resolve Actions 142
7.5 Configure SMTP, SMS, SNMP and/or Nagios service for alert notifications 142
7.5.1 Send Email alerts 142
7.5.2 Send SMS alerts 143
7.5.3 Send SNMP trap alerts 145
7.5.4 Nagios alerts 146
7.6 Logging 146
7.6.1 Log storage 146
7.6.2 Serial port logging 147
7.6.3 Network TCP and UDP port logging 148
7.6.4 Auto-Response event logging 148
7.6.5 Power device logging 148
POWER & ENVIRONMENTAL MANAGEMENT 149
_____________________________________________________________________
724-746-5500 | blackbox.com Page 8