Free 24-hour tech support: 724-746-5500 blackbox.com © 2010. All rights reserved. Black Box Corporation. High-Density Media Converter System II Fully manageable systems with Layer 1 or Layer 2 conversion options.
Servers PBX Features » Customize this versatile system to your application. » Chassis available can be ordered with or without SNMP management capabilities. » For remote locations, order compact desktop chassis. » LinkLoss and/or FiberAlert diagnostics for troubleshooting. » Bandwidth Manager enables you to control per-port bandwidth. » Copper-to-fiber, fiber-to-fiber, copper-tocopper, and single-strand fiber modules available. » Layer 2 converters increase network efficiency.
High-Density Media Converter System II Chassis with Modular SNMP LMC5207A-R2 (with modules installed) Get full control of your media converter connections in your enterprise by ordering a High-Density Media Converter System II Chassis as well as a plug-in SNMP Management Module. Choose from a desktop 3-slot chassis, a 1U rackmount or desktop 6-slot chassis, or a 3U rackmount 20-slot chassis (the chassis ship with blank plates already installed, and the 6- and 20-slot models include rackmounting hardware).
High-Density Media Converter System II Chassis with Modular SNMP (Continued) T ec h S P ecs Chassis: Approvals — FCC Class B, Part 15; CE Indicators — LNK, FDX, RCV, XMT, MGMT, SNMP Temperature Tolerance — Operating: 32 to 122° F (0 to 50° C); Storage: -13 to +158° F (-25 to +70° C) Humidity Tolerance — 5 to 95% (noncondensing) Power — LMC5233A, LMC5203A, LMC5227A, LMC5207A-R2: 100–240 VAC, 50/60 Hz, autosensing, 1/0.5 A; LMC5234A, LMC5204A: 100–240 VAC, 50/60 Hz, autosensing, 0.5/0.
High-Density Media Converter System II Unmanaged Chassis LMC5103A Choose 1- or 2-Slot Desktop Chassis for use as remote unmanaged media converters in your High-Density Media Converter System II application. With these tabletop units, you can customize your network to the protocols and media most appropriate for your application.
Layer 1 Media Converter Modules Layer 1 Media Converter Modules for the High-Density Media Converter System II convert the incoming electrical signal from one cable type and then transmit it over another type. These media converters bridge the gap between two different Ethernet types and are totally transparent to network operation, having no effect on the data being sent across the link.
LMC5014C-R2 11/1/2010 #24435 724-746-5500 Item Code High-Density Media Converter System II Layer 1 Media Converter Modules 10BASE-T to 10BASE-FL Multimode, 850-nm 4 km ST LMC5014C-R2 SC LMC5015C-R2 Multimode, 1300-nm 10 km ST LMC5016C-R2 SC LMC5017C-R2 Single-Mode Plus, 1310-nm 40 km ST LMC5020C-R2 SC LMC5021C-R2 10BASE-T/100BASE-TX to 100BASE-FX Multimode, 850-nm 300 m ST LMC5040C 100BASE-TX to 100BASE-FX Multimode, 850-nm 300 m ST
Layer 2 Media Converter Modules Unlike Layer 1 media converters, which only convert one Ethernet media type to another, Layer 2 Media Converter Modules for the High-Density Media Converter System II are true switches—they actively store, filter, and forward Ethernet packets like any other MAC layer switch. Layer 2 converters increase network efficiency and reduce network overhead, significantly increasing data throughput.
LGC5942C 11/1/2010 #24435 724-746-5500 Item Code High-Density Media Converter System II Layer 2 Switching Modules 10BASE-T/100BASE-TX to 100BASE-FX/LX Multimode, 1300-nm (100BASE-FX) 2 km ST® LMC5118C-R2 SC LMC5119C-R2 Single-Mode Plus, 1310-nm (100BASE-LX) LMC5120C 40 km ST SC LMC5121C 10BASE-T/100BASE-TX to 100BASE-LX Single-Strand Single-Mode (Order one of each.
T1/E1/J1 Modules T1/E1/J1 modules for the High-Density Media Converter System II enable you to extend 1.544-Mbps T1/J1 or 2.048-Mbps E1 copperbased circuits over duplex fiber optic cable. They’re ideal for use with PBX systems or legacy telco circuits. These modules are selectable to support 1.544-Mbps T1 (ANSI T1.403), 2.048-Mbps E1 (G.703), or 1.544-Mbps J1.
DS3/E3/STS-1 Modules DS3/E3/STS-1 Modules for the High-Density Media Converter System II provide conversion from BNC coax cable to fiber for DS3, E3, or STS-1 applications. They’re ideal in Municipal Area Network (MAN) access applications, for linking buildings over a campus area network, or anywhere incoming coaxial circuits need to be converted to fiber for distribution. Use fiber to extend high-speed coax circuits at greater distances and never worry about interference.
Fiber Mode Conversion Modules LMC5032C 11/1/2010 #24435 724-746-5500 These protocol-independent modules convert multimode to singlemode fiber. Use them to add extra distance—up to 70 kilometers (43.5 miles)—to your fiber infrastructure. Or use them for migrating your multimode fiber infrastructure to single mode.
Layer 2 managed modules and media converters Managed High-Density Media Converter System II Modules work with all High-Density Media Converter System II chassis. Because management features are built into the module, not the chassis, the modules are fully manageable even if installed in an unmanaged chassis. Multiport Managed Media Converters work as remote units with the chassis-based modules.
