Specifications

Chapter 3: Install the High-Density Media Converter System II
Page 22
724-746-5500 | blackbox.com
LMC5207A-R3
The red Alarm Reset Button also functions as a Fan Test button. To verify fan
functionality, hold the button down for several seconds; the fans should engage.
The fans will turn off when the button is released.
3.3.2 Installing Management and Application Modules
SNMP Management Modules include two twisted pair ports, one for management
and one reserved for future use. The Management Module also features a DB9
serial port, and supports SNMP V1/V2c.
Installing Applications Modules
To install a module:
1. Remove the blank bracket (if present) covering the slot where the module will
be installed. Black Box recommends installing blank brackets in unused
module slots.
2. Slide the module into the chassis using the card guides.
3. Secure the module to the chassis by tightening the captive screw. (Refer to
the documentation shipped with the module for configuration information.)
To manage a Desktop Chassis, install the SNMP Management Module in the
appropriate slot of the chassis.
• Install the 3-Slot Desktop Chassis SNMP Management Module into the
bottom left slot.
NOTE
This slot is ONLY for the Management Module; do not install Application Modules such
as media conversion and mode conversion modules in this slot.