User manual

[e-mail] • www.blackbox.nl 15
Cabling
Space Gain
CAT5e and CAT6 90° Angle Patch Cables
Tight fit? These cables have the right angle to save space.
Save up to four inches of space in crowded cabinets. •
Make tight wallplate connections behind furniture and equipment.•
Tame cable chaos on your desktop. •
For the perfect fit, choose from a whole family of cables with up, down, left, and right angled connectors.•
Meet or exceed CAT5e or CAT6 specifications.•
Avoid excessive bends and reduce stress on the cable.•
Feature four 24 AWG unshielded twisted wires, RJ-45 connectors, molded boots, and a PVC jacket.•
Connectors have gold-plated contacts.•
Retrofitting a cabinet? Installing newer, deeper equipment? Want to make sure your
cabinet door closes?
In high-density configurations, cabinet space is becoming an increasingly scarce commodity. Gain space in
your cabinets (and ensure the door will close) by using our exclusive SpaceGAIN 90° Patch Cables. You can
save up to 10cm of space in front of your patch panels and rack-mounted equipment. That’s significant
when every centimeter counts in today’s high-density data centers. If you’ve ever retrofitted cabinets or
installed extra-deep equipment, you’ve probably run into the problem of not being able to close the cabinet
door. SpaceGAIN solves the problem. Better yet, you’ll save both time and money by eliminating cable
managers.
The down and up cables are ideal for data center applications. Use them for high-density patch panel
connections. Tame the cable chaos on your desk with the right and left cables. Use them for quick laptop
connects and disconnects. They’re also ideal for tight wallplate connections behind desks and other furniture.
Save even more space...
... with this SpaceGAIN combo:
• CAT5e/CAT6 90° Angle Cables
• 48-Port, 1U High-Density Feed-Through
Patch Panels
To fit 48 ports in only 1U, the patch panel
connectors face up on the top row and down
on the bottom row as indicated by the tab
area. To achieve the tight, neat configuration
as shown above, use 90° Down Cables for
both rows. This may seem counter intuitive.
But the “Down” cable has a clip facing down.
Just use it upside down for the top row of the
patch panel.
Left–Straight Cable
The clip is on the bottom
and the connector faces
left. Shown:
EVNSL27E-0003-90LS
The clip is on the
bottom and the
connector faces right.
Shown:
EVNSL21E-0003-90RS
Right–Straight Cable
The clip is on the bottom
and the cable runs
down. Shown:
EVNSL21E-0003-90DD
Down–Down Cable
The down clip faces down
and the cable runs down.
The up clip faces down
and the cable runs up.
Shown:
EVNSL23E-0003-90DU
Down–Up Cable
Item Code
SpaceGAIN 90° Angle Patch Cable (UTP)
Down–Up Series
CAT5e 100-MHz
1-ft. (0.3-m) EVNSLXXE-0001-90YY
3-ft. (0.9-m) EVNSLXXE-0003-90YY
6-ft. (1.8-m) EVNSLXXE-0006-90YY
10-ft. (3.0-m) EVNSLXXE-0010-90YY
15-ft. (4.5-m) EVNSLXXE-0015-90YY
CAT6 250-MHz
1-ft. (0.3-m) EVNSLXXX-0001-90YY
3-ft. (0.9-m) EVNSLXXX-0003-90YY
6-ft. (1.8-m) EVNSLXXX-0006-90YY
10-ft. (3.0-m) EVNSLXXX-0010-90YY
15-ft. (4.5-m) EVNSLXXX-0015-90YY
SpaceGAIN 90° Angle Patch Cable (UTP)
Left–Right Series
CAT5e 100-MHz
3-ft. (0.9-m) EVNSLXXE-0003-90YY
6-ft. (1.8-m) EVNSLXXE-0006-90YY
10-ft. (3.0-m) EVNSLXXE-0010-90YY
CAT6 250-MHz
3-ft. (0.9-m) EVNSLXXX-0003-90YY
6-ft. (1.8-m) EVNSLXXX-0006-90YY
10-ft. (3.0-m) EVNSLXXX-0010-90YY
To order, replace the “X“s with the number assigned to each color.
CAT5e Blue = 21 Red = 23 Yellow = 24
Black = 27
CAT6e Blue = 216 Red = 236 Yellow = 246
Black = 276
Then replace the “YY“ with the letters assigned to each
orientation.
90° Down - 180° Straight = DS
90° Down - 180° Up = DU
90° Down - 180° Down = DD
90° Right - 180° Straight = RS
90° Left - 180° Straight = LS
Example: EVNSL21E-0003-90RS signifies a CAT5e blue, 3-foot,
90° right connector to a straight connector cable.
Connector combinations
Choose from a variety of down, up, left, and right
connector combinations.
Down and up cables
90° down to a 180° straight connector•
90° down to a 90° down connector•
90° down to a 90° up connector•
Left and right cables.
(not to be used in patch panel and switch
applications)
90° left to a 180° straight connector•
90° right to a 180° straight connector•
TECH SPECS
CAT6:
ACR (Minimum) — -1.1 dB/100 m
Attenuation — 23.8 dB/100 m @ 100 MHz;
39.4 dB/100 m @ 250 MHz
ELFEXT — 27.8 dB/100 m @ 100 MHz; 19.8 dB/100 m @ 250 MHz
Frequency — Up to 250 MHz
NEXT — 42.3 dB/100 m @ 100 MHz; 36.3 dB/100 m @ 250 MHz
Propagation Delay — 536 dB/100 m @ 250 MHz
PS-ELFEXT — 24.8 dB/100 m @ 100 MHz; 16.8 dB/100 m @ 250 MHz
PS-NEXT — 42.3 dB/100 m @ 100 MHz; 36.3 dB/100 m @ 100 MHz
Return Loss — 19.0 dB/100 m @ 100 MHz;
15.6 dB/100 m @ 250 MHz
CAT5e:
Attenuation — 26.4 dB/100 m @ 100 MHz
ELFEXT — 26.4 dB/100 m @ 100 MHz
Frequency — Up to 100 MHz
NEXT — 35.3 dB/100 m @ 100 MHz
Propagation Delay — 538 dB/100 m @ 100 MHz
PS-ELFEXT — 20.8 dB/100 m @ 100 MHz
PS-NEXT — 32.3 dB/100 m @ 100 MHz
Resistance — 45 ohms/1000 ft.
Return Loss — 19.0 dB/100 m @ 100 MHz
Structural Return Loss — 16.0 dB/100 m @ 100 MHz
CAT5e and CAT6:
Cable Type — 4-pair UTP
Conductor Gauge — 24 AWG, stranded
Delay Skew — 45 ns/100 m
Impedance — 100 ± 15 ohms
Mutual Capacitance — 15 pF/ft.
Down cable: cable clip faces down
and the cable angles down.
Shown: EVNSL24E-0003-90DS
Right cable: cable clip faces up
and cable exits to the left.
Shown: EVNSL21E-0003-90RS
The right angles to clean up
your desktop.
A
B
S
O
L
U
T
E
L
Y
F
O
R
L
I
F
E
GUARANTEED
A
B
S
O
L
U
T
E
L
Y
F
O
R
L
I
F
E