User manual

16 Free Tech Support 030-241 77 99 • Sales 030-241 77 77
Cabling
What’s included
(1) SpaceGAIN High-Density Feed-Through
Patch Panel
(4) 10-32 cuphead screws
(4) 12-24 cuphead screws
(8) cable ties
(8) station ID labels
Space Gain
SpaceGAIN CAT5e/CAT6 High-Density
Feed-Through Patch Panels
Fit 48 ports into only 1U of rack space and
no punchdowns needed!
Save space in crowded data cabinets. •
Feature 48 easy-to-use RJ-45 to RJ-45 •
feed-through ports — all in 1U!
Use this sturdy panel for high-density applications •
in all 19" relay racks or communications cabinets.
Provide patching without punching down the •
wires to the ports.
Meet or Category 6 or Category 5e performance •
requirements.
Choose from shielded or unshielded models.•
Cable management bar helps support cables •
attached to the rear of the panel.
Find out more
about our latest prices
at www.blackbox.nl
Item Code
SpaceGAIN High-Density Feed-Through Patch
Panels
CAT6
Shielded
JPM816A-HD
Unshielded JPM820A-HD
Item Code
SpaceGAIN High-Density Feed-Through Patch
Panels (Continued)
CAT5e
Shielded JPM806A-HD
Unshielded JPM810A-HD
TECH SPECS
Connectors — (48) RJ-45 front; (48) RJ-45 rear
Standards — CAT5e and CAT6: TIA/EIA-568-C.2
Wiring — T568A or T568B, 22 to 26 AWG,
solid or stranded
Size — 1.75"H (1U) x 19"W x 6"D
(4.4 x 48.3 x 15.3 cm)
Weight — JPM816A-HD, JPM806A-HD: 3.8 lb. (1.7 kg);
JPM820A-HD, JPM810A-HD: 2.4 lb. (1.1 kg)
JPM820A-HD: front view
JPM810A-HD: front view
JPM810A-HD: rear view
JPM806A-HD: front view
CA T
5e
CA T
6
Use the High-Density Feed-Through Patch Pa nels (above) with
our 90° Down Patch Cables (EVNSL21E-0001-90DD).
90° Down Patch Cables
(EVNSL21E-0001-90DD)
Save even more space ...
... with this SpaceGAIN combo: High-Density Feed-Through
Patch Panels and CAT5e/CAT6 90-Degree Patch Cables.
Retrofitting a cabinet?
Installing newer, deeper equipment?
Want to make sure your cabinet door closes?
In high-density configurations, cabinet space is becoming an increasingly
scarce commodity. Gain space in your cabinets (and ensure the door will
close) by using our exclusive SpaceGAIN 90° Patch Cables with your
new High-Density Feed-Through Patch Panel.
To fit 48 ports in only 1U, the patch panel connectors face up on the
top row and down on the bottom row as indicated by the tab area. To
achieve the tight, neat configuration as shown to the right, use 90°
Down Cables for both rows. This may seem counter intuitive. But the
“Down” cable has a clip facing down. Just use it upside down for the
top row of the patch panel.
A
B
S
O
L
U
T
E
L
Y
F
O
R
L
I
F
E
GUARANTEED
A
B
S
O
L
U
T
E
L
Y
F
O
R
L
I
F
E