User manual

info@blackbox.nl • www.blackbox.nl
19
Test Equipment
Copper
LAN Solution Network Testers
Copper
Copper Taps • Copper Aggregators • Optical Taps
TS5000A
LAN Solution GB Network Tester Kit
Tests CAT6 Gigabit Ethernet cable runs.
Tests PoE to ensure adequate power for powered
devices such as VoIP phones.
Detects and reports speed, duplex mode, wiring
mode, and polarity of transmit pair for active
Ethernet and other devices up to 1 GB.
Port discovery, ping test, and hub flash.
Simultaneously pings three addresses.
Identifies hub or switch port and links to Cisco
®
bridge or router ports using Cisco Discovery
Protocol.
Tests cabling configuration and verifies
connectivity.
Checks for opens, shorts, miswires, split pairs,
faults, and reverses.
Wire maps network connections.
Conducts single-ended and remote cable tests.
What’s included
(1) Tester
(9) remotes
Tone tracer probe
1-ft. RJ-45 to alligator clips cable
(2) 1-ft. RJ-45/RJ-45 cables
(2) 7.5" RJ-12 to RJ-12 cables
Nylon case
LAN Solution Network Tester and Kit
Tests cable and monitors and corrects network
problems with Physical Layer and link conditions.
Tests CATx cable.
Also enables you to test coax cable (with coax
connectors attached), map to remotes, and select
which pins have tone.
Checks for opens, shorts, miswires, and split pairs.
Identifies port services like Ethernet, ISDN, POTS,
and Token Ring.
Reports speed, location, and capabilities of
network devices.
Pinging function verifies connections.
What’s included
TS560A:
LAN Solution Network Tester
Remote
(2) 12" RJ-45/alligator-clip cable assemblies
(2) 12" UTP cables with RJ-45 connectors
(2) 7.5" cable assemblies with RJ-12 connectors
for RJ-11 and RJ-45 jacks
Carrying case
9-V alkaline battery
TS565A:
All the above plus:
(8) remotes
Tone tracer
(2) RJ-45-to-F type coax connectors
Item Code
LAN Solution GB Network Tester Kit TS5000A
LAN Solution Network Tester TS560A
LAN Solution Network Tester Kit TS565A
Item Code
10/100 Copper Tap TS230A-R2
10/100/1000 Copper Tap TS250A
10/100/1000 Copper Aggregators
256 MB Buffer TS254A
512 MB Buffer TS255A
1-GB Aggregator Tap TS256A
Item Code
Single-Channel Optical Tap, 50/50 Split Ratio
Multimode 50-μm TS243A
62.5-μm TS240A-R2
Single-Mode 9m TS244A
10-GbE Optical Tap, 50/50 Split Ratio
Multimode 50-μm TS245A
Single-Mode 9-μm TS246A
Rackmount Bracket, 19", 1U TS253
Get advanced troubleshooting with these easy-to-use testers.
TS250A
Monitor high-speed copper or fiber links with no network disruption or
downtime.
Get an accurate view of your copper or fiber optic network.
Provide a complete copy of data from full-duplex network links.
Operate transparently and don’t block error packets.
Provide passthrough signals.
Can be left in place permanently.
Connect and disconnect monitoring devices without disruption.
Use with network and protocol analyzers, security monitoring devices, RMON probes, and more.
Copper Tap model has separate transmit and receive channels; Aggregator models combine
streams for dual monitoring.
Provide continuous data flow if the power fails.
Pro-Tip
Leave the guesswork
to the amateurs.
Black Box cable testers provide quick, accurate
information that all cables installers need. Test
for shorts, opens, miswires, and reversals. ID
cables, generate tone, and measure length.
Or choose one of our more advanced testers
to check for PoE, display network speed, and
more. Why work harder when you can work
smarter?
Now
available
for CAT6