Modem User Manual

Modem 34336

Autodialing the Stored Number. To autodial the stored number from

the EIA status screen, press the following pushbuttons in sequence:

ENT

Pushbutton 3 (to select DIAL from MAIN MENU screen 1)

Pushbutton 1 (to select DIAL from the AUTO-DIAL screen)

When the local modem successfully establishes a connection with the remote

unit, the EIA status screen should be present. This screen looks like the one

shown below.

If the modem’s LCD displays an AUTO-DIAL FAILURE message,

refer to Table 2-2.

Terminating a Data Call. Normal termination of a data call is processed

through communication software. An alternate method is switching the

HANGUP option on the AUTO-DIAL screen. Another method is to drop

the DTR signal from the DTE (by software control or by turning the DTE off).

For manual originate/answer operation, see Chapter 4.

2.4.4 L

EASED

INE

(2-

4-W

IRE

) M

ODE

UICK

ETUPS

6, 7, 8,

AND

This section does not apply to V.33 leased line operation. For V.33 leased line

operation, see the next section.

Table 2-2. Auto-Dial Failure Messages.

FAILURE MESSAGE EXPLANATION

LINE OCCUPIED The data line is already in use.

DIAL NOT ALLOWED Modem is not configured for dial

backup.

NO DTR DTR is not present.

NO LINE CURR Loss of line current.

D TR MR RS CS TD

9600 CD RD