User's Manual

112
ETHERNET TO TWINAX/COAX PRINT SERVER
Resolution: Cycle power or reset the print server in order for the print server to
automatically reconnect to the file server. The print server must be connected to
the LAN while the file server is running. Then whenever the file server is brought
down and then back up again, the print server will automatically reconnect.
Problem: After configuring the print server to use Novell, and performing a reset,
the Power LED blinks for a long time. There is no self-test report printed, and the
print server cannot be seen in the print-control utility’s List of Print Servers screen.
If the print server is left alone for a long time with the Power LED blinking,
eventually the startup process will bypass the Novell login process and will then
print the self-test.
Resolution: The start up process has not been able to complete. Generally this
occurs when there is an incorrect Novell password. On the List of Print Servers
screen, from the Protocol drop-down menu, select Novell. Click on the Scan for
Print Servers button. If the print server appears on the list, than an incorrect
Novell password has been entered. Correct the password. (It is recommended that
a password not be used.) It may be necessary to assign a new password at the Novell
server as well as the print server.
Problem: Cannot print from NetWare 4.x or 5.x. The print server self-test page
indicates there are no Novell queues available, and/or a error page prints on the
printer that states that the print server “Can Not Login as a Novell Print Server.”
Resolution: NetWare’s print services has lost its association of the NetWare printer
object and the NetWare print server object.
1. Enter Novell NetWare Administrator.
2. Locate the print server object on the Add button.
3. Choose Assignment, then click on the Add button.
4. From the list of printer objects, select the objects that represent the print
server to be added.
5. Exit the NetWare Administrator.
6. Start the print-control utility.
7. From the List of Print Servers, highlight the designated print server.