User's Manual

132
ETHERNET TO TWINAX/COAX PRINT SERVER
Command
ASCII DEC HEX Description
Printer
Emulation Interpretation
ESC = 61 3D Set MSB to 0 Epson Ignored (not sup-
ported only Code
Page 437 or 850
supported)
ESC = 61 3D Define
user-defined
characters
Proprinter Ignored (not sup-
ported)
ESC > 62 3E Set MSB to 1 Proprinter
and Epson
Ignored (not sup-
ported only Code
Page 437 or 850
supported)
ESC ? 63 3F Reassign
graphics
mode
Proprinter
and Epson
Ignored (not sup-
ported)
ESC
@
64 40 Initialize
printer
Proprinter
and Epson
Commands to
reset printer
functions to
defaults are sent
ESC
A
65 41 Select n/72-
inch line
spacing
Epson Twinax: n/72-inch
sent (ignored on
5256 printer)
Coax: Closest
LPI selected for
LPI commands
set on front panel
ESC
A
65 41 Set n/72-inch
line spacing
Proprinter Twinax: n/72-inch
sent if selected by
following ESC
(32h) command
(ignored on 5256
printer) Coax:
Closest LPI
selected for LPI
commands set on
front panel