User's Manual

21
CHAPTER 4: TCP/IP Printing
4. TCP/IP Printing
Refer to this chapter for instructions on setting up TCP/IP connectivity protocols
to both the IBM mainframe and AS/400.
If you have not already installed the print-control utility, please go back to Section
3.2 and do so now. Then proceed configuring the print server and the hosts that
you will be printing from. Chapter 4 consists of the following sections:
Configuring the Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.1
Configuring the IBM mainframe for TN3270e . . . . . . . . . . . . . . . . . . Section 4.2
Configuring for IPDS Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.3
Configuring OS/400 for TN5250e . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.4
Configuring OS/400 for AnyNet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.5
Configuring Windows NT V3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.6
Configuring Windows NT V4.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 4.7
TCP/IP DirectPort Printing for Windows 95/98 . . . . . . . . . . . . . . . . . Section 4.8
NOTE
LPR/LPD is not supported when sending unconverted print jobs (in
EBCDIC format) from an IBM mainframe or AS/400. LPR/LPD is,
however, supported when printing ASCII jobs from any host system
(including UNIX, Windows 95/98/NT/2000, Novell, OS/2, etc.) when the
printer attached to the print server is a SCS type printer.
After you have completed the configuration of these protocols, go to Chapter 7 to
complete the print server’s setup. If the attached printer is an IPDS printer, you
will also need to go to Chapter 8.