User's Manual

41
CHAPTER 5: Novell NetWare Printing
5. Novell NetWare Printing
Refer to this chapter for instructions on setting up the print server and NetWare
fileserver.
Please note that only SCS twinax or SCS/DSC coax printers attached to the print
server can be printed to using a “generic” text Epson FX, or IBM Proprinter print
driver from the PC/LAN host. Rasterized data (such as most Windows print drivers
send out) cannot be converted into EBCDIC text.
If you have not already installed the print-control utility, please go back to Section
3.2 and do so now. Then skip to the section that applies to your NetWare setup.
Configuring the Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.1
Controlled or Public Access Printer, Novell NetWare 5.x
(NDPS), NWAdmin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.2
Print Server, Novell NetWare 4.x (NDS), NWAdmin . . . . . . . . Section 5.3
Print Server, Novell NetWare 4.x (NDS), PCONSOLE . . . . . . Section 5.4
Remote Printer, Novell NetWare 4.x (NDS), NWAdmin . . . . . Section 5.5
Remote Printer, Novell NetWare 4.x (NDS), PCONSOLE . . . Section 5.6
Print Server, Novell NetWare 3.x and 2.x . . . . . . . . . . . . . . . . . Section 5.7
Remote Printer, Novell NetWare 3.x and 2.x, PCONSOLE. . . Section 5.8
After you have completed the configuration of these protocols, go to Chapter 7 to
complete the print server’s setup. If the attached printer is an IPDS printer, you
will also need to go to Chapter 8.
5.1 Configuring the Print Server
After starting the print-control utility, select the desired print server from the
displayed list. The print servers are identified through their serial number and
network address. Both of these are unique to the specific print server and can be
found on the bottom of the print server as well as on the self-test print out.