User's Manual

42
ETHERNET TO TWINAX/COAX PRINT SERVER
Open the configuration dialog box by double-clicking on the desired print server
or by highlighting the desired print server and then pressing the Configure button
displayed in the tool bar. Follow these simple steps to configure the print server
according to the Connection Type you chose previously. The options were:
Remote (printer on IPX). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.1.1
Remote (LRP on IP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.1.2
Forward Jobs to a Queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.1.3
5.1.1 R EMOTE (P RINTER ON IPX)
1. Select NW Remote Printer by clicking on the white box in front of that
selection.
2. The column titled “Object Information” will display the available
configuration parameters.
a. In the Print Server field, enter the SAP Name assigned during step 8A in
Section 5.2.2.
b. In the field next to the print server’s local port (LPT1) that the target
printer is attached to, enter the printer number.
3. If you want to configure additional protocols, refer to the respective section.
If your configuration of the print server is complete, click on the Apply
Changes button on the bottom of the configuration window. Then Exit the
utility.
5.1.2 R EMOTE (LPR ON IP)
1. If you haven’t already done so, assign an IP address to the print server. Refer
to Section 4.1.1 for more information.
2. To turn off the printing of the banner page, the trailer page or any possible
blank pages, configure the TCP/IP logical port as TCP1. On the main Print
Server Information screen, click on Printer Ports/Emulation and then on the
respective TCP/IP Logical Port.
5.1.3 F ORWARD J OBS TO A Q UEUE
If the print server isn’t already configured for servicing a NDS queue, refer to
Section 4.1 for more information.