User's Manual

43
CHAPTER 5: Novell NetWare Printing
5.1.4 C LIENT C ONFIGURATION
Public Access printers can be configured from any client running the NetWare 5
client software. The user does not have to be signed on to the Novell network. To
set up a Controlled Access printer, the client has to be signed on to the Novell
network.
5.1.5 P UBLIC A CCESS P RINTERS
1. Double-click on the Network Neighborhood icon on the Windows desktop.
2. Double-click on the Entire Network icon.
3. Open the NDPS Public Access Printers folder.
4. Double-click on the desired Public Access printer.
5. Follow the instructions given by the Windows Add Printer Wizard.
5.1.6 C ONTROLLED A CCESS P RINTERS
1. Double-click on the Network Neighborhood icon on the Windows desktop.
2. Open the NDS context the NDPS printer object resides in.
3. Locate the desired NDPS printer object and double-click its icon.
4. Follow the instructions given by the Windows Add Printer Wizard.
5.2 Controlled or Public Access Printer, Novell NetWare 5.x (NDPS), NWAdmin
Under NetWare 5.x, printers attached through a print server can be configured as
Controlled Access or Public Access printers. The instructions below cover both
types unless noted otherwise. The following steps are covered:
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.2.1
Creating a NDPS Printer Object . . . . . . . . . . . . . . . . . . . . . . . Section 5.2.2