User's Manual

44
ETHERNET TO TWINAX/COAX PRINT SERVER
5.2.1 P REREQUISITES
To create a Printer Agent under NDPS, the following requirements must be met:
• The user must have at least Read, Write, Modify, and Create rights for the
destination container where its associated Printer object will reside. This is not
necessary when creating a Public Access printer.
• The user must be designated as a Manager of the NDPS Manager that will
control this Printer Agent.
• A NDPS Broker must be running.
• A NDPS Manager object must be created.
Please refer to your Novell documentation for more information on these
requirements. An on-line user’s guide can be found at
www.novell.documentation.com.
5.2.2 C REATING A NDPS P RINTER O BJECT
1. After logging into the Novell network with the above-mentioned rights, start
the NetWare Administrator.
2. Creating a printer:
a. When creating a Controlled Access printer, click on the container where
you want the NDPS Printer object to reside.
i. From the Object menu, select Create.
ii. From the displayed list, select NDPS Printer. Click OK.
iii.Enter a name of your choice in the NDPS Printer Name field.
iv. Select Create a New Printer Agent as the Printer Agent Source and click
Create.
v. If desired, change the default Printer Agent (PA) Name, then browse
for the NDPS Manager Name.
b. When creating a Public Access printer, double-click on the NDPS
Manager.
i. Click on the Printer Agent List button on the right side of the displayed
window.