User's Manual

48
ETHERNET TO TWINAX/COAX PRINT SERVER
4. At the Create Print Queue window, enter the queue name in the Print Queue
Name field.
5. Select the volume from the Print Queue Volume pull-down list in the Select
Object window.
6. Click OK.
7. Click the Create button on the Create Print Queue window.
8. Double-click the icon for the just-created printer.
9. Click the Assignments button.
10. Click the Add… button.
11. Select the Queue name. This name becomes the selected object.
NOTE
The selected printer is automatically set as the default.
12. Click OK.
13. Click OK.
5.3.5 C ONFIGURING THE P RINT S ERVER
After starting the print-control utility, select the desired print server from the
displayed list. The print servers are identified through their serial number and
network address. Both of these are unique to the specific print server and can be
found on the bottom of the print server as well as on the self-test print out.
Open the configuration dialog box by double clicking on the desired print server
or by highlighting the desired print server and then pressing the Configure button
in the tool bar. Follow these simple steps to configure the print server as a Novell
NetWare 4.x NDS Print Server:
1. Select NW Print Server by clicking on the white box in front of that selection.
2. The column titled “Object Information” will display the available
configuration parameters.
a. Replace the default Print Server Name (the Black Box serial number) with
the Print Server Name assigned during Adding a Print Server Object (see
Section 5.3.2).