User's Manual

49
CHAPTER 5: Novell NetWare Printing
b. If necessary, enter the Password for this print server object and change the
Ethernet [frame] Type and the Queue Polling Time.
The Queue List and Notify List are for information only. This information
must be changed on the Novell NetWare server.
3. In the left column of the print-control screen, click on the white circle in
front of NDS.
4. Then click the NDS button.
5. The column titled “Object Information” will display the available
configuration parameters. Enter the name of the correct NDS Tree and NDS
Context manually or using the Browse button.
6. If you want to configure additional protocols, refer to the respective section.
If your configuration of the print server is complete, click on the Apply
Changes button on the bottom of the configuration window. Then Exit the
utility.
5.3.6 C LIENT C ONFIGURATION
To enable a client workstation to print to a NetWare queue, a local port must be
captured. This can be accomplished using the NetWare User Tools from within MS
Windows or through a capture command from the DOS prompt.
To capture a local port using NetWare User Tools from within MS Windows:
1. Open NetWare User Tools from your desktop.
2. Click on the printer icon on the top tool bar. The client’s available ports
(LPT1...) will be displayed on the left side of the screen. The available queues
(resources) will be displayed on the right.
3. Click on the desired port, then on the queue you want to capture, and finally
on the Capture button.
4. Complete the capture process by configuring the LPT Settings and making
the capture Permanent, if so desired. Then Exit the program.
The same results can be obtained by using the Capture command from the DOS
prompt:
At the DOS prompt, type the following command:
capture local=n queue=name