User's Manual

ETHERNET TO TWINAX/COAX PRINT SERVER

where n is the number of the LPT port you want to assign the queue to and

name is the name of the queue you want to capture.

5.4 Print Server, Novell NetWare 4.x (NDS), PCONSOLE

Configuring the print server as a NetWare print server under NDS requires the

following steps:

Adding a Print Server Object. . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.4.1

Adding Printer Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.4.2

Adding Print Queue Objects . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.4.3

Configuring the Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.4.4

Client Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.4.5

5.4.1 A

DDING A

RINT

ERVER

BJECT

1. Login to NetWare as ADMIN, or as a user with ADMIN security equivalence.

2. Start NetWare’s PCONSOLE program.

3. If necessary, use PCONSOLE’s Change Context selection to change to the

context where you want to install the print server. If you are not sure which

context you should install the print server in, install the print server in the

context that contains the users that will be using the print server most. For

more information about contexts and other NetWare 4.x concepts, see your

NetWare manuals.

4. On a piece of paper, write down the context in which you are installing the

print server. You can read this from the Context: item at the top of

PCONSOLE’s screen. Later, you will use this information to configure the

print server.

5. Go to PCONSOLE’s Available Options menu and choose Print Servers. The

Print Servers list appears.

6. Press <Ins> to add a new print server to the list. The New Print Server Name

form appears.

7. Enter a name for the new print server and press <Enter>.