User's Manual
52
ETHERNET TO TWINAX/COAX PRINT SERVER
8. In the Serviced Printers list, select the printer you just added, and press
<Enter>. The Printer Configuration form appears.
NOTE
Ignore the Printer Type, Configuration, Buffer Size, and Sampling
Interval items on the Printer Configuration form. These items are not
relevant to print server installations.
9. Select the Printer Number entry, and enter a value from the table below to
associate that printer with the print server’s port.
10. If you are going to add a print queue to the new printer, go to Section 5.4.3.
Otherwise, reset the print server by powering it OFF and back ON again or by
using the Reset button in the print-control utility.
5.4.3 A
DDING
P
RINT
Q
UEUE
O
BJECTS
Perform the procedure below to associate NetWare print queue objects with the
print server’s NetWare Printer objects (see Section 5.4.2). Do this when installing a
new print server, or when adding a new queue to be serviced by an existing
NetWare Printer object associated with the print server.
1. If you haven’t already done so, start PCONSOLE, and change to the context
where the print server’s NetWare Printer object resides. Then select the
printer you want to associate the print queue(s) with and press <Enter>. The
Printer Configuration form appears.
2. Select the Print queues assigned entry and press <Enter>. The Print Queues
list appears. Make sure that there is at least one queue in the list.
3. Press <Ins> to add a queue to the Print Queues list. The Object, Class list
appears.
4. Navigate the Object, Class list to the context where the print queue object
resides, or where you want to create a new print queue object. This should be
the context where the majority of the queue users reside.
5. If the queue you want to add to the Print Queue list does not exist yet, press
<Ins> to add a new queue to the Object, Class list. PCONSOLE prompts you
for a name and volume, then adds the new queue to the Object, Class list.
6. In the Object, Class list, select a Printer Queue to add to the printer’s Print
Queues list. Then press <Enter>. The new queue appears in the printer’s
Print Queues list.