User's Manual

ETHERNET TO TWINAX/COAX PRINT SERVER

7. If you want to add another queue to the printer’s Print Queues list, repeat

step 2 through 6 of this procedure.

8. Press <Esc> several times until the Exit? menu appears. Select Yes and press

<Enter>.

5.6.4 R

ELOADING THE

RINT

ERVER

NLM

1. Go to the console of the file server where the print server NLM is running or

will be running.

2. If you already have a print server NLM loaded, unload it now by typing

unload pserver

at the prompt. Otherwise proceed directly to step 3.

3. Reload the print server NLM by typing the following at the prompt:

load pserver pserver_name

pserver_name is the name of the existing print server NLM or of the print

server created in Section 5.6.1.

5.6.5 C

ONFIGURING THE

RINT

ERVER

After starting the print-control utility, select the desired print server from the

displayed list. The print servers are identified through their serial number and

network address. Both of these are unique to the specific print server and can be

found on the bottom of the print server as well as on the self-test print out.

Open the configuration dialog box by double clicking on the desired print server

or by highlighting the desired print server and then pressing the Configure button

in the tool bar.

Follow these simple steps to configure the print server as a Novell NetWare Remote

Printer.

1. Select NW Remote Printer by clicking on the white box in front of that

selection.

2. Click the NW Remote Printer button.

3. The column titled “Object Information” will display the available

configuration parameters.