User's Manual

65
CHAPTER 5: Novell NetWare Printing
IMPORTANT
Observe the following points concerning the print server’s name:
• Do not use more than 19 characters in the print server’s name.
PCONSOLE allows you to enter print server names longer that this, but
the print server does not support names longer than 19 characters.
• Do not use spaces in the print server name. Use dashes or
underscores instead. PCONSOLE allows spaces in the print server
name, but the print server does not support this. However, you can use
spaces in the names of the queues or printer objects.
b. If necessary enter the Password for this print server object and change the
Ethernet [frame] Type and the Queue Polling Time.
8. In the left column of the print-control screen, click on the white circle in
front of bindery.
9. Then click the bindery button.
10. The column titled “Object Information” will display the available
configuration parameters. Enter the name of the Master File Server.
11. Click on the Queues button.
12. Select the print server’s printer port you want to assign queues to from the
available options displayed in the field labeled “Ports.”
13 Add a new queue by typing the name of the new queue into the field labeled
“New Queue Name”.
14. Click on the Add>> button (it’s next to the “New Queue Name” field).
15. Repeat steps 12 through 14 to add additional queues. Click OK.
16. If you want to configure additional protocols, refer to the respective section.
If your configuration of the print server is complete, click on the Apply
Changes button on the bottom of the configuration window. Then Exit the
utility.
17. Print-control will automatically create the following objects on the NetWare
file server:
• a print server object,
• print queue object(s), and