User's Manual

66
ETHERNET TO TWINAX/COAX PRINT SERVER
• printer objects for all physical ports on the print server.
5.7.2 C LIENT C ONFIGURATION
To enable a client workstation to print to a NetWare queue, a local port must be
captured. This can be accomplished using the NetWare User Tools from within MS
Windows or through a capture command from the DOS prompt.
To capture a local port using NetWare User Tools from within MS Windows:
1. Open NetWare User Tools from your desktop.
2. Click on the printer icon on the top tool bar. The client’s available ports
(LPT1, LPT2,...) will be displayed on the left side of the screen. The available
queues (resources) will be displayed on the right.
3. Click on the desired port, then on the queue you want to capture, and finally
on the Capture button.
4. Complete the capture process by configuring the LPT Settings and making
the capture Permanent, if so desired. Then Exit the program.
The same results can be obtained by using the Capture command from the DOS
prompt by typing the following:
capture local=n queue=name
where n is the number of the LPT port you want to assign the queue to and name is
the name of the queue you want to capture.
5.8 Remote Printer, Novell NetWare 3.x and 2.x , PCONSOLE
Configuring the print server as a remote printer under NetWare requires the
following steps:
Adding Print Queue Objects on the Novell Server ........................Section 5.8.1
Optional: Adding a Print Server Object on the Novell Server ......Section 5.8.2
Adding Printer Objects on the Novell Server ................................Section 5.8.3
Associating Printer Objects with Print Queue Objects...................Section 5.8.4
Reloading the NetWare PServer NLM ............................................Section 5.8.5
Configuring the Print Server............................................................Section 5.8.6