User's Manual

67
CHAPTER 5: Novell NetWare Printing
Client Configuration.........................................................................Section 5.8.7
5.8.1 A DDING P RINT Q UEUE O BJECTS ON THE N OVELL S ERVER
If you are going to set up the print server remote printer to use print queues that
already exist, skip this section. Otherwise, perform the procedure below to create
NetWare print queue objects. Do this when installing a new print server, or when
adding a new queue to be serviced by an existing NetWare Printer object associated
with the print server.
1. Login to a NetWare file server as SUPERVISOR, or as a user with
SUPERVISOR security equivalence. If there are more than one file server on
your network, log into the one you want to be the print server’s master file
server.
2. If you haven’t already done so, start PCONSOLE.
3. From the Available Options menu, select Print Queue Information and press
<Enter>.
4. Press <Insert> to add a new queue to the list.
5. Type a queue name and press <Enter>.
6. If you want to add additional queues, repeat steps 3 and 4.
7. Press <Esc> until the Available Options menu appears.
5.8.2 O PTIONAL : A DDING A P RINT S ERVER O BJECT ON THE N OVELL S ERVER
If the print server NLM is already running on your Novell server, skip this section
and proceed directly to Section 5.8.3. Otherwise, follow these steps.
1. From PCONSOLE’s Available Options menu, select Print Server Information.
2. Press <Ins>.
3. Enter a name for the new print server and press <Enter>.