User's Manual

ETHERNET TO TWINAX/COAX PRINT SERVER

IMPORTANT

Observe the following points concerning the print server’s name:

• Do not use more than 19 characters in the print server’s name.

PCONSOLE allows you to enter print server names longer that this, but

the print server does not support names longer than 19 characters.

• Do not use spaces in the print server name. Use dashes or

underscores instead. PCONSOLE allows spaces in the print server

name, but the print server does not support this. However, you can use

spaces in the names of the queues or printer objects.

After a moment, PCONSOLE returns to the Print Servers list. The new print

server appears in the list.

4. Press <ESC> to return to the Available Options menu.

5.8.3 A

DDING

RINTER

BJECTS ON THE

OVELL

ERVER

Perform the procedures below to associate NetWare printer objects with the

printers connected to the print server’s ports. Do this when installing a new print

server, or when connecting a new printer to the print server to service NetWare

print queues.

1. From the Available Options menu, select Print Server Information.

2. In the Print Servers list, select the desired Novell print server and press

<Enter>.

3. Select Print Server Configuration and press <Enter>.

4. Select Printer Configuration and press <Enter>.

5. For each of the print server ports to which you are connecting a printer, select

one of the Not Installed printers and press <Enter>.

6. Assign a name to the printer and select the type according to the

following table :

6. Press <ESC> and select Save Changes? Yes.

7. Press <ESC> again to return to the Print Server Configuration menu.

Printer Attached to

I-O Printer Server’s

Physical Port

Twinax/Coax Remote Parallel, LPT1

NetWare

Printer Type