User's Manual
73
CHAPTER 6: SNA (APPC) Printing
XX identifies the printer(s) that was (were) actually attached to the print
server at the time the SNA (APPC) configuration was applied to the print
server or at the time the print server was last reset. XX identifies the
printer(s) attached to the print server in the following manner:
6.2 Retrieving AS/400 Parameters
This section explains how to locate the parameters needed for the configuration of
the print server, namely:
Adapter Address (AS/400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 6.2.1
Host Network ID and Host Control Point Name . . . . . . . . . . . . . Section 6.2.2
AS/400 Auto-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 6.2.3
6.2.1 A
DAPTER
A
DDRESS
(AS/400)
1. Type WRKLIND (Work Line Description) on the AS/400’s command line.
Press Enter.
2. Locate the line that the print server is attached to from the displayed lines.
Enter 5 (Display) in the field in front of that line. Press Enter.
3. Locate the Local adapter address. This is the value you wanted to find. As you
enter it in the print-control’s menu, make sure to change the format to
XX:XX:XX:XX:XX:XX.
6.2.2 H
OST
N
ETWORK
ID
AND
H
OST
C
ONTROL
P
OINT
N
AME
1. Type DSPNETA (Display Network Attributes) on the AS/400’s command
line. Press Enter.
XX-Value
Printer Attached to
I-O Print Server
physical port
Corresponding
logical port with
5250 printer
session
00 Twinax SCS1