User's Manual

ETHERNET TO TWINAX/COAX PRINT SERVER

8.1.5 C

ONFIGURING

V3R2

PSF/400 for V3R2

The following instructions are used to create a printer device description:

1. At the AS/400 command line, enter the command CRTDEVPRT.

2. Press the F11 key to display the keywords.

3. In the Device Description (DEVD) field, enter the name of the printer

attached to the print server. The name may comprise of the letters A–Z and

numerals 0–9. It must begin with a letter, and a maximum of 10 characters

are allowed.

4. In the Device Class (DEVCLS) field, enter *RMT.

5. In the Device Type (TYPE) field, enter *IPDS.

6. In the Device Model (MODEL) field, enter 0.

7. In the Advanced Function Printing (AFP) field, enter *YES.

8. In the AFP Attachment (AFPATTACH) field, enter *APPC.

9. In the Font (FONT) field, enter an appropriate value such as 11.

10. In the Form Feed (FORMFEED) field, enter *AUTOCUT. If the printer is a

dot matrix, enter *CONT.

11. In the Remote Location (RMTLOCNAME) field, enter TCPIP.

AFP for V3R2

The following instructions are used to create a data area that is used by PSF/400:

1. At the AS/400 command line, enter the command CRTPSFCFG.

2. Press F11 to display the keywords, then press F10 to display additional values.

3. In the PSF Configuration (PSFCFG) field, enter the name of the printer

attached to the print server.

4. In the Library field, enter QGPL.

5. In the IPDS Pass Through (IPDSPASTHR) field, enter *YES. This causes

PSF/400 to transform SCS into IPDS before printing.