User's Manual

90
ETHERNET TO TWINAX/COAX PRINT SERVER
PSF/400 for V3R7, V4R1, and Above
The following instructions are used to create a printer device description:
1. At the AS/400 command line, enter the command CRTDEVPRT.
2. Press the F11 key to display the keywords.
3. In the Device Description (DEVD) field, enter the name of the printer
attached to the print server. The name may be comprised of the letters A–Z
and numerals 0–9, must begin with a letter, with a maximum of 10 characters
allowed.
4. In the Device Class (DEVCLS) field, enter *LAN.
5. In the Device Type (TYPE) field, enter *IPDS.
6. In the Device Model (MODEL) field, enter 0.
7. In the LAN Attachment (LANATTACH) field, enter *IP.
8. In the Advanced Function Printing field, enter *YES.
9. In the Port Number (PORT) field, enter 5001.
10. In the Font (FONT) field, enter an appropriate value such as 11.
11. In the Form Feed (FORMFEED) field, enter *AUTOCUT. If the printer is a
dot-matrix, enter *CONT.
12. In the Activation Timer (ACTTMR) field, enter *NOMAX. This will cause the
AS/400 host to wait indefinitely for a response to an activation request.
13. In the Remote Location (RMTLOCNAME) field, enter the TCP/IP address of
the printer attached to the print server. You may also enter the host name if
you used the optional CFGTCP command to create a TCP/IP Host Table
entry.
14. In the User-Defined Object (USRDFNOBJ) field, enter the name of the print
server. Leave the library blank unless you know its name. Enter *PSFCFG as
the object type.