Specifications
12
MULTI-HEAD SERVSWITCH™
2. Introduction
The Multi-Head ServSwitch™ is a high-performance keyboard-, mouse-, and
monitor-sharing device that supports a wide range of IBM
®
PC compatible
hardware with multiple video outputs. Four models are available:
• 2-Port Dual Video (product code SW614A) for switching between two dual-
head CPUs;
• 2-Port Quad Video (SW616A) for switching between two quad-head CPUs;
• 4-Port Dual Video (SW617A) for switching between four dual-head CPUs; and
• 4-Port Quad Video (SW619A) for switching between four quad-head CPUs.
2.1 Features and Benefits
Here are some of the useful features of the Multi-Head ServSwitch and some of the
ways those features benefit you:
•
Control multiple computer CPUs with two to four video outputs from a single
keyboard, mouse, and set of monitors.
• Continuous keyboard and mouse emulation on all ports ensures problem-free
computer bootup. And because all ports are simultaneously active, all attached
CPUs can be booted at the same time.
• Can usually draw all the power it needs from the attached CPUs. For
demanding applications with high-end video, etc., an optional power supply
(product code PS649) is available.
• Intelligent switching: You can scan/switch between all ports or just the active
ones.
• Flash-upgradable for easy on-site firmware upgrades.
• Supports high-bandwidth monitors, at resolutions up to 1600 x 1280 pixels and
refresh rates up to 100 Hz, with low distortion.
• Video channels support Display Data Channel (DDC/DDC1/DDC2) signaling.
• Password security prevents unauthorized use.
• Local channel switching using its front-panel pushbutton, a keyboard hotkey
sequence, or a 3-button mouse.
• Remote channel switching through its RS-232 serial port, using its convenient
optional Remote-Control Module or some other device.