Specifications

14
MULTI-HEAD SERVSWITCH™
2.3 The Multi-Head ServSwitch Illustrated
Figure 2-1. The Multi-Head ServSwitch’s front panel.
Figure 2-2. The Multi-Head ServSwitch’s rear panel (SW619A shown).
The bottom panel of the Multi-Head ServSwitch isn’t shown here, but there’s an
8-position DIP switch mounted on it. You’ll use this switch if you ever do a “warm
reset” of the Switch (see Section 5.10) or upgrade its firmware (see Section 5.11).
You can also use an optional Remote-Control Module with the Multi-Head
ServSwitch (see Section 5.2). This is what the Module looks like:
Figure 2-3. The Remote-Control Module (KV6REM).
Display shows
status and
mouse/keyboard
data activity
Button for
changing
channels and
entering
configuration
mode
CPU-port video
connectors (blue)
Control
port
Connector
for
optional
power
supply
Control-port
mouse connector
Control-port
keyboard connector
Expansion
port for
Remote-
Control
Module,
RS-232
control, and
firmware
upgrades
CPU ports 1 through 4 (ports 3 and 4
are present on 4-port models only)
Control-port
monitor
connectors
CPU-port mouse
connectors (green)
CPU-port keyboard
connectors (purple)
Display shows status and
mouse/keyboard data activity
Button for changing
channels and
entering
configuration mode