Specifications

MULTI-HEAD SERVSWITCH™

4. Configuration

To configure your Multi-Head ServSwitch system, you’ll need to configure first the

attached PCs, as directed in Section 4.1, then the Switch itself, as directed in the

rest of this chapter.

IMPORTANT NOTE

Throughout the rest of this manual, the [Enter] designation refers to the

main “enter” or “carriage-return” key (often labeled “↵”) on the main

section of the keyboard. Do not use the “Enter” key on the numeric

keypad or the extra “Enter” key found on the main section of some

specialized keyboards.

4.1 Configuring Your PCs

Configure your PCs in the same way that you would if your keyboard, mouse, and

monitors were all connected directly to your PCs. Keep in mind that the Multi-

Head ServSwitch emulates Microsoft compatible serial, IntelliMouse, and PS/2

mice; so you’ll need to make sure that your PC software is configured for a

Microsoft mouse of the correct type. Refer to the list of supported drivers in

Section 3.1.