Datasheet
724-746-5500 blackbox.com
BL A C K B O X
®
2 of 5
11/15/2011
#23616
»
Choose from UTP/STP/coax testers or Ethernet/
Fast Ethernet/Gigabit testers.
»
Or, identify an RJ-45 jack (10BASE-T Ethernet],
100BASE-TX [Fast Ethernet],
1000BASE-T [Gigabit Ethernet], Token Ring,
analog telephone, or PBX).
FEATURES
• Nonintrusive monitoring. Inductive sensor reads data signals
through UTP, STP, and coax cable.
• Tests active links—no need to isolate a link from the LAN.
• Display LAN activity on Ethernet and EtherTalk
®
networks.
• Simply insert cable into the open clamp—it closes and aligns
automatically.
• Has an RS-232 interface and includes cable and software
for downloading of measurements to a host computer.
• Log network loading and traffic for 24-hour intervals.
• Includes an RS-232 interface, a software for downloading
data, and a handy carrying pouch.
• Verify connectivity, measure network segment loading,
and log traffic levels.
• Includes an RS-232 interface.
No more disassembling your network and adding adapters and
connectors to access data signals! The Net-Advisor eliminates these
hassles by reading the signals through the cable and providing
the necessary fault-isolation information without a direct electrical
connection. This pocket size tester is battery operated with an
AC adapter for extended operation. Tracking is quick and easy!
Just press enter and insert your UTP, STP, or coax cable into
the open clamp. It closes and aligns the cable automatically.
The Net-Advisor instantly displays Ethernet activity on the cable.
High-frequency magnetics quickly locate dead drops, verify good
punchdowns, and isolate choke points in one or more segments.
Users can also evaluate network loading of new applications. The
Net-Advisor even spots "no packet" conditions that more expensive
software can't.
Operating in Traffic Mode provides real-time network statistics,
including instantaneous, average, and peak ultilization. Log Mode
records and graphically presents network loading over time. It features
unattended traffic level logging from 12 minutes to 24 hours. Audio
signals indicate when the traffic threshold is exceeded.
Plus, it includes an RS-232 interface and DataManager software
for data downloading to a personal computer or other user terminal.
Net-Advisor-RS (TS024A)
TS024A
Veri-Net and Veri-Net+
• Tests active links; no need to isolate a link from the LAN.
• Veri-Net models decode link signals and display the exact
configuration of the connected equipment within seconds.
• Veri-Net+ features “Link Activation.”
• Veri-Net+ auto-matically powers down after 12 minutes
of inactivity.
• Fault light on the Veri-Net+ flashes when the battery is low.
Veri-Net (TS022A)
The Veri-Net (TS022A) is an essential tool for testing Fast Ethernet
(100BASE-TX) and standard Ethernet (10BASE-T) links. This tester
decodes link signals and displays the exact configuration of the
equipment connected— all at the press of a button. Test results
appear in only three seconds!
The Veri-Net also verifies link connectivity to the far end, tests
for reported faults, and determines the polarity of the outlet or cable.
While the Veri-Net is a receive-only tester, the Veri-Net+ adds a
transmit function called “Link Activation.” It transmits a link pulse
simulating a link partner which can be viewed on the far-end
equipment (such as a hub, switch, or NIC) as a distinctive “blink-blink”
of the Link LED. This lets you verify two-way Link integrity and identify
connections from the wall outlet to the hub or switch. It performs all
these functions and is a receive-only tester.
The Veri-Net Accessory Pack (TS026) includes (1) nylon mesh
carrying pouch, (1) 16" RJ-45 patch cable, and (1) RJ-45 coupler.
Veri-Net+
(TS027A-R3)
Get all the features of the Veri-Net, plus a bidirectional Link
Activation function, a tone generator that enables you to trace the
cable path with a standard tone probe when a “No Link” condition
is found, and a 6-inch pigtail for easier connections.
Also, the Veri-Net+ automatically powers down after 12 minutes
of inactivity, and its fault light flashes when the battery is low.
TS022A TS027A-R3
TS026