® ® NETWORK SERVICES DECEMBER 2008 ACU5501A Wizard DVI SRX USER GUIDE rd a z Wi X R S I DV OX TE MO RE ® DE RA 72 4 6 -74 -55 00 ON G UP ® 3 KB 2 AC 1 BL K LIN L CA LO ON TO 4 ER W PO CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.
Contents Further information Troubleshooting.........................................................................11 Getting assistance.......................................................................11 Safety information.....................................................................12 Radio Frequency Energy............................................................13 Normas Oficiales Mexicanas (NOM) safety statement.............14 BlackBox subsidiary contact details.......................
Welcome Proprietary pre-emphasis and equalisation techniques are used within the local and remote modules respectively to achieve the best possible video image at the monitor. See page 7 for further details. PC BLACK BOX DVI SRX VIDEO USB modules can reliably transfer video rates up to 165Mpixels per second. This is in addition to two USB channels for keyboard and mouse - all via the same single length of Category 5, 5e or 6 twisted pair cabling.
What’s in the box ard Wiz X DV L ® W PO AC K BO X DV GR 4-7 46 -55 ® W PO ON TO LO 20W power adapter and country- specific power lead CD-ROM K C AL ON USB cable 2m (type A to B) ® TE MO E AD TE MO 00 LIN X I SR RE UP 72 ard Wiz ER K RE ® CA LO BL LIN TO X I SR 72 4-7 46 -55 00 ER Wizard DVI SRX local and remote modules Rack mount plate plus three screws Video cable DVI/D to DVI/D Eight self-adhesive rubber feet Two ferrite cores What you ma
Installation ® Mounting the modules – desk or rack The DVI SRX modules can be situated on a desk (or floor) or alternatively, for larger installations, mounted within an optional rack mount chassis. Desk mount Apply the supplied selfadhesive rubber feet to the underside of the module. BL AC KB Both modules have a block of four mini switches located on their side panels. All switches should remain OFF at all times during normal operation.
® Connections at the local module Link connection 1 Attach one of the supplied ferrite cores to the link cable, next to the connector. This is necessary to ensure compliance with the European EMC directive and FCC regulations. 2 Connect the link cable (see page 2 for cable advice) to the local module socket labelled TO REMOTE.
® Connections at the remote module 1 Attach one of the supplied ferrite cores to the link cable, next to the connector. This is necessary to ensure compliance with the European EMC directive and FCC regulations. 2 Connect the link cable (see page 2 for cable advice) to the remote module socket labelled TO LOCAL.
Video image compensation To adjust the video image 1 Connect the DVI SRX modules to the computer and peripherals as discussed earlier in this chapter. Power on the remote module and switch on the computer. 2 On the keyboard connected to the remote module, simultaneously press the and keys to enter Configuration mode - the three indicators on the keyboard should flash slowly in sequence.
Performing upgrades The DVI SRX modules are fully upgradeable via flash upgrades in order to take advantage of our continual drive to improve products. Such upgrades require a Windows-based computer system to be linked via the special upgrade port located on the remote module. The upgrade process is handled by the KVM Firmware Uploader utility, which is available from Black Box and allows you to check the current revision of the DVI SRX modules.
9 - Cycle the power Disconnect the power. Disconnect the remote module from the upgrade computer and return switch 1 on the remote module to its OFF position. Reconnect the modules in their normal manner. When the power is re-applied the DVI SRX modules will operate using the new firmware. INSTALLATION ADVICE – Connect the supplied protective ferrites at each end of the CATx link cable and avoid disconnecting the CATx link cable whilst the product is operational (powered on).
Operation ® Power and activity indicators Each module provides two indicators to confirm power status and also feedback about the various input signals: TE MO ON NK Yellow: • On when a valid DVI video input signal is being received from the local module. Flashes regularly (twice per second) when no valid DVI video signal is being received from the local module. • Blinks in response to inputs from the keyboard/mouse. F Green: • On when power is present.
Further information The video image is showing some small flickering of the pixels • The combination of cable length and screen resolution may be causing data errors that the video monitor cannot currently resolve. Try adjusting the video compensation setting. See Video image compensation for details. techsupport@blackbox.com in the UK: techhelp@blackbox.co.
Safety information • For use in dry, oil free indoor environments only. • Do not use to link between buildings. • Ensure that the twisted pair interconnect cable is installed in compliance with all applicable wiring regulations. • Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment. • Warning – the power adapter contains live parts.
Radio Frequency Energy Canadian Department of Communications RFI statement This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.
Normas Oficiales Mexicanas (NOM) electrical safety statement 15 En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia. 16 El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo. 17 Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018, United States of America Tel: +1-724-746-5500 Fax: +1-724-746-0746 © 2008 Black Box Corporation All trademarks are acknowledged. ® Documentation by: www.ctxd.
BlackBox subsidiary contact details United States www.blackbox.com 724-746-5500 724-746-0746 Austria www.black-box.at support@black-box.at +43 1 256 98 56 +43 1 256 98 56 Belgium www.blackbox.be support.nederlands@blackbox.be support.french@blackbox.be support.english@blackbox.be +32 2 725 85 50 +32 2 725 92 12 Denmark www.blackbox.dk support@blackbox.dk +45 56 63 30 10 +45 56 65 08 05 Finland www.blackbox.fi tuki@blackbox.fi +35 201 888 800 +35 201 888 808 France www.blackbox.
