Use and Care Guide

ManualsBrandsBlack Bull ManualsHand Trucks & Dollies1500-lb 4-Wheel Green Steel Dolly

SMD1500

SNOWMOBILE DOLLY SET MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS

PRODUCT.

This manual provides important information on proper operation & maintenance.

Every effort has been made to ensure the accuracy of this manual. These

instructions are not meant to cover every possible condition and situation that may

occur. We reserve the right to change this product at any time without prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE

OR UNSAFE, DO NOT OPERATE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER!

If you experience a problem, have questions or need parts for this product, call

Customer Service at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central

Time. A copy of the sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL

USE. KEEP THIS MANUAL, SALES RECEIPT &

APPLICABLE WARRANTY FOR FUTURE REFERENCE.

WARNING: DO NOT EXCEED 1,500 lb Max Capacity

SPECIFICATIONS: (1 EACH) Measures 7 inch x 7 inch, (2 EACH) 7.75 inch x 10

inch. 3.25 inch High. 2.5 inch casters provide 360° turning radius.

Summary of content (4 pages)

PAGE 1
SMD1500 SNOWMOBILE DOLLY SET MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions and warnings before use. Failure to follow all instructions may result in serious personal injury or product damage. WARNING: Always keep dollies dry and free from excess moisture when loading snowmobiles onto the dollies. Excess moisture can cause dollies to become slippery and snowmobiles may slip off causing personal injury or product damage. WARNING: Always check dollies for any cracks, dents or frame bending.
PAGE 3
INSTALLTION OF FRONT SKI DOLLIES 1 Align one of the front-ridged dollies with the center of the right ski. Once the center of the ski has been found, secure the straps over the top of the ski so that the ski fits snug into the ridge in the center of the dolly. 2 When the ski is secure, ensure that the strap is tight and that there is no twisting or knots in the straps. 3 Align the other front-ridged dolly with the center of the left ski.
PAGE 4
INSTALL REAR TRACK DOLLY Place the flat-top dolly about 1 foot from the rear of the snowmobile in the center of the track. If the dolly is placed in the correct location, the load of the snowmobile will balance properly. WARNING: Failure to secure the rear track dolly in the location specified by this manual may result in an unbalanced load. An unbalanced load can tip or become unstable which may result in personal injury, loss of load or product damage.