Use and Care Manual

ManualsBrandsBLACK BULL ManualsTools & Hardware40 Gal. Portable Soda Blaster

SB40

40 lb. Portable Soda Blaster

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation and maintenance. Every effort has

been made to ensure the accuracy of this manual. We reserve the right to change this product at any

time without prior notice. Before use, read carefully and understand all warnings, cautions,

instructions and labels. Failure to do so could result in serious personal injury, property damage or

even death.

STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS.

DO NOT RETURN THIS PRODUCT TO THE RETAILER.

If you experience a problem or need parts for this product, call our customer help line at

1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time or visit our website http://www.buffalotools.com

A copy of the sales receipt is required.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR

UNSAFE, DO NOT OPERATE THIS PRODUCT!

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE.

201301

Summary of content (10 pages)

PAGE 1
SB40 201301 40 lb. Portable Soda Blaster Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. Before use, read carefully and understand all warnings, cautions, instructions and labels.
PAGE 2
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when assembling or using this product. Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand. This is a safety alert symbol.
PAGE 3
IMPORTANT SAFETY RULES COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury. Do not operate the soda blaster in explosive areas, such as in the presence of flammable liquids, gases or dust. Tools create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating the soda blaster.
PAGE 4
Follow these steps to maintain safe working conditions and good working condition of air blaster. Improper care can result in electric shock or serious injury. Secure and support the work piece using clamps. Do not use your hands to hold the piece in place. Use the correct tool for the job. Using the correct tool is safer and faster. Keep out of reach of children, or any untrained person. Store tools in a safe and dry place. Keep tools clean.
PAGE 5
ATTACH AIR PRESSURE REGULATOR 1. Wrap the threads of the Pressure Gauge with thread sealer tape (not included). Screw the Pressure Gauge into the opening in the face of the Air Pressure Regulator. Tighten snugly using a 9/16” wrench on the back of the gauge block. Rotate till snug but do not overtighten. 2. Attach Bracket to the Tank using the two Socket Head Screws and wrench tighten. Observe the orientation, remove the Compression Nut past the Air Pressure Regulator Knob and through the Bracket.
PAGE 6
Work Piece and Work Area Set Up Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury. Route the air hose along a safe path to reach the work area without creating a tripping hazard or exposing the air hose to possible damage. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working.
PAGE 7
OPERATION Always wear hood, dust mask and heavy duty canvas gloves when operating the blaster. Before operating your soda blaster, inspect each connection, double checking to make sure that all are tight and properly sealed. Loading Soda Media 1. Check to make sure the soda media is dry and clean so that it does not clog the unit. 2. Close the brass Air Supply Valve by turning it to the vertical position. 3. To release the pressure from the Tank, press Safety Trigger until air stops. 4.
PAGE 8
MAINTENANCE Procedures not specifically explained in this manual must be performed only by a qualified technician. To prevent serious injury from accidental operation: Turn off the Soda Blaster, detach the air supply, safely discharge any residual air pressure in the Blaster before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from Soda Blaster failure: Do not use damaged equipment.
PAGE 9
PARTS DIAGRAM SB40 40 Lb Capacity Portable Soda Blaster Assembly & Operating Instructions 9
PAGE 10