Full Product Manual

ITEM# DTP54 DIESEL FUEL TRANSFER TANK W/PUMP INSTRUCTION MANUAL
CONTACT BUFFALO CORP if you have questions about this product. Call our Customer Service at
636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
FOR DIESEL USE ONLY, NOT FOR GASOLINE
A) Attach pump to rubber hose
B) Attach Swivel Fitting to other end of rubber hose
C) Insert Swivel Fitting end of rubber hose into pump
D) Firmly grip Swivel Fitting and screw it in tightly.
1) Attach battery cables Red (POSITIVE) to Red (POSITIVE) and Black (Negative)
to Unpainted Metal
2) Confirm fuel is inside tank (54 Gallon Max Capacity DIESEL FUEL ONLY)
3) Turn Power on.
4) Remove hose and grip the nozzle
5) Open gas cap, insert nozzle, press auto shut-off nozzle release to dispsense
fuel into tank.
6) When finished, turn the power off then release the nozzle to allow
excess fuel to drain out of the hose.
7) Wrap hose and nozzle back into tank, then remove battery cables.
NOTE: Adjust the leak-proof breather vent as necessary. You cannot put fuel into your tank
unless you can get the air out, and you cannot withdraw fuel from your tank unless you can let air in.
1 2 3
4 5 6
Breather Vent
Recess drain plug
2 3
A B C D