Replacement Part List

PW2750 Hot Water Pressure Washer Manual

HOW TO CLEAN NOZZLES

If the spray nozzle is blocked, pressure will become extremely high, and if spray nozzle is partly blocked, pressure will become unstable.

1. Stop pressure washer and shut off the water source.

2. Trigger the gun and release the pressure

3. Take off the spray wand.

4. Remove the spray nozzle and use a needle to clean.

HOW TO CLEAN A STRAINER

To clean a strainer, unscrew the water inlet and take out the strainer. Wash both sides of the strainer. Reinstall.

Check and wash the strainer regularly. Do NOT use the pressure washer without the strainer.

Spark Plug Maintenance

This LP tool is more efficient than traditional gasoline tools. As such, the spark plug on this LP tool will last longer.

Please contact Customer Service if you have questions regarding the spark plug.

STORAGE/TRANSPORT PROCEDURES

Never place any type of storage cover on this tool while it is still hot.

When transporting or storing this tool for extended time:

• Allow tool to fully cool before moving it. A hot engine and exhaust system can burn you and ignite some materials.

• Turn the fuel valve to the “off” position.

• Disconnect the spark plug.

• Do not obstruct any ventilation openings.

• Do not drop or strike this tool while moving it.

• Store this tool in a cool dry area, free of excessive dust.

5. Wash the wand for 30 seconds.

6. Reinstall the nozzle.

7. Reinstall the wand and trigger gun.

8. Restart the pressure washer.